Mining Transportation Equipment Conveyor Roller idler
1.Conveyor range
Our conveyor roller can widely applied for mining, coal, metallurgy, electric power, sea port, grain, chemical and almost any industry which have conveying system. And we can produce any kinds roller, such as iron roller, impact roller, rubber lagging roller, and disc roller.
What more, we have technical design team to design the new type products and best after-sale services.
2.Brife introduction for Yilun Conveyor roller
1.Material: Steel,rubber
2.Bearing:6204,6205,6305,6306,6307,6308,6309,6310
3.Daimeter: Ø50-Ø219
4.Lenght:120mm-2200mm
5.Seal: double labyrinth seal
5.Workign life:30000-50000hours
6.Standards:GB,CEMA,JIS,DIN,AUSTRALIA
7.Color: mulit-color for choice
3.Advantages
The pipe we choose is the high quality welding pipe,the roundness is The shaft we choose is high-precsion rond cold steel,the roundness is
lower 0.6mm,the straightnesss is 0.15%, the wall thickness tolerance 0.8, and the tolerance is only ±0.0065mm, make sure the bearing and
is ±0.1mm, the thickness from 2.5~6.0mm, diaeter is from 50~219mm. shaft match closely, the bearing move safely.
0.8,±0.1mm, the thickness from 2.5~6.0mm, diaeter is from 50~219mm.
The pipe is rust removal to increase paint adhesion.
Bearing housing is punched by the superipr steel sheet(SPHC), This bearing is the joint ventures, it is the roller special double
After that, we will use the housing circle machine to cut the outside seal, the bearing inner race have V-groove, grease is also the
of the housing, to make sure the high Concentricity of the roller and imported grease (Inject the grease into the both sides of the ball
the small runout. bearing).
This seal is the national standard double labyrinth seal, 4 pieces We can print the brand for the customer requests, but need the
pom and 3 pieces stell seal.Injected the high quality No.2 lithium customer give us the authorization.
grease. it is water proof and dustproof,anti-corrosion,wear-resisting,ect...
4.Technical specifications:
| 1 |
Brand: YL |
| 2 |
Lift Time: 30000-50000hours |
| 3 |
Production Capacity: as usual 1500pieces/day. |
| 4 |
Roller Diameter: 50-219mm. |
| 5 |
Roller Length: 150mm to 3500mm. |
| 6 |
Roller Pipe: Q235 carbon steel,high-precision ERW seam pipe with state-of roundness and straightness to ensure well-balanced rotation. |
| 7 |
Shaft: Accurate shaft are made of cold-drawn bright round steel, which is superior in corrosion resistance and stiffness.We have strict control over tolerance of shaft dimension and surface quality.The service lifespan can be well secured and proloned. |
| 8 |
Bearing: Ball bearing provided with C3 group of clearance, RS shield deep-groove to ensure a nice fit and off-set any expected temperature rise during operation by means of internal clearance OR according to your requirements. |
| 9 |
Bearing Brand: NSK, LYC,HRB, or according to your requirements. |
| 10 |
Seals: The babyrinth seal structure is of non-contact type, and durable and has less rotation-resistance and long life-span as to be of optimum structure, particularly for a long-distance and large capacity conveyor for bulk material. It is approved from the testing of national authoritative organization that Seal employed is of dustproof and waterproof type, whose performance proved to be satisfactory and has by a long way exceeded the GB and JIS standard after our repeated research and development.Factory high quality greased full for life. |
| 11 |
Color: black, red, blue, yellow available , or according to your requirement. |
| 12 |
Finish: Ordinary painting/Rubber/Steel screw/Galvanized. |
| 13 |
Welding: Mixed gas shielded arc welding end. |
| 14 |
Professional designing and inspection team. |
| 15 |
Standard: ISO/Australia/CEMA/JIS/DIN. |
| 16 |
Package: Export standard plywood cases with waterproofing film. |
5.Technical quality team
6.Packing & Shipping
we can provide different kinds of packing for the customer.
Wooden box and wooden pallet packing for your choice.
7.Certificate
8.Customer visiting and the exhibitions
9.After sale service
We provide the customer best after sale services, and we solve the problems any time.
10.Company introduction
1.)Dezhou Yilun conveying Machinery Co.,Ltd was founded in 2005.
2.)It's registered capital is 11.68million CNY and It is private joint-stock enterprise. Our main products are cnoveyor roller,idler,frame, pulley,belt and belt conveyor system for TD75 ,DTII,DTIIA,CEMA ects.
3.)we has large lathes, numerical control, double pressing machine, double welding machine, double boring lathe, milling machine, sawing machine and so on. The products have gained various patents. We can produce more than one thousand rollers and ten pulleys per day.
4.)We have the professionalQC dept. to keep the good quality before the goods sent out.
The products are sold to Middle East,Africa ,Australia,Europe,Southeast Asia,Russia and some other countries and regions. We will Strengthen the inner management and improve our products' quality constantly.
We will offer the best products for customers from the beginning to the end.
8.FAQ
1.Q: Your bearing type and brand usually use?
A:Large clearance C3 2RS type deep ball bearing withSRB, and according to customer's requirements.
2.Q: How is your Payment Term?
A: T/T or L/C. Another payment term we can also discuss.
3.Q: Can you customize it?
A: We support customization according to your request.
4.Q: What's the MOQ?
A: 50 piece.
5.Q: What's the production capacity of your conveyor roller?
1500 pcs/day.
6.Q: What's your roller's lifetime?
Our rollers have a long lifetime with good performance and usually
make sure 30000 to 50000 hours under the normal site and operation.
Contact us:
Contact person: Sunny Li
Audited Supplier 
){kind=link}
){kind=link}